Product overview

Transformers can transform the grid voltage into the voltage required by the system or load to realize the transmission and distribution of electric energy. This transformer can replace the transformer with silicon steel sheet core and be widely used in outdoor power distribution systems. The grid connection of this product in large number can achieve good energy-saving effect and reduce air pollution. This product is especially suitable for areas with insufficient electric energy, large load fluctuation and difficult routine maintenance. Since the transformer adopts a fully sealed structure, insulating oil and medium are not polluted by the atmosphere, so it can run in humid environment and is ideal power distribution equipment in urban and rural power distribution networks.

Features

For energy-saving products, no-load loss is reduced by about 75% compared with S9 transformer;

The product has low loss, less heat generation, low temperature rise and stable operation;

Advanced and reasonable structure, strong short-circuit resistance;

Strong overload capability, safety and reliability,

Strong corrosion resistance and is maintenance-free.

Types of meaning

Product standards

GB1094.1 ~ 2-2013 GB/T 25446-2010

High pressure rating: 10 (10.5, 11, 6, 6.3, 6.6) kV

Low pressure rating: 0.4 kV

Tapping range: non-field excitation changer (plus or minus 5%, plus or minus 2 x2.5% )

Link category: Dyn11 or Yyno

Insulation level: LI75AC35 / AC5

S(B)H15-M series 10 kv three-phase double winding excitation regulating distribution transformer

Note: for the rated capacity of 500 kva and below transformer, load loss value of the diagonal lines in the table above apply to Dyn11 or Yzn11 link group, slash at the bottom of the load loss value applies to Yyno link group.

Product outline drawing